[svlug] 20/20 on Hans Reiser tonight

John Abreau john.abreau at zuken.com
Tue Nov 6 23:19:49 EST 2007


I have that 20/20 episode recorded on a Tivo Series 2, but when
I tested the video extraction results last night, I found that the
transcoder didn't sync the audio and video correctly.

So it's not much use until I find a better transcoder to decode
the encrypted .tivo files to a properly synced mpeg file.


Jarod Wilson wrote:
> On Nov 04, 2007, at 05:23, Kristian Erik Hermansen wrote:
>
>> On 11/2/07, Jarod Wilson <jarod at wilsonet.com> wrote:
>>> Interesting... Just told Myth to record it.
>>
>> So how was the show?  Good?  Where is the recording :-)
>
> Ugh. I'm not sure. Need to check my logs and see if I can see
> anything. I scheduled the recording on my only remaining analog card
> (lower resolution, faster to transcode, etc) just before sending my
> prior mail, but at least within the Myth UI I see no evidence of any
> recording attempt...
>
> <a few minutes pass>
>
> Okay, the failure was in the backend log.
>
> 2007-11-02 22:00:01.390 TVRec(9): Changing from None to RecordingOnly
> 2007-11-02 22:00:01.417 TVRec(9): HW Tuner: 9->9
> 2007-11-02 22:00:01.421 Channel(/dev/video0) Error:
> SetInputAndFormat(6, ATSC)
>                          while setting format (v4l v2)
>                         eno: Invalid argument (22)
> 2007-11-02 22:00:01.422 Channel(/dev/video0) Error:
> SetInputAndFormat(6, ATSC)
>                          while setting format (v4l v2)
>                         eno: Invalid argument (22)
> 2007-11-02 22:00:01.423 Channel(/dev/video0): SetInputAndFormat() failed
> 2007-11-02 22:00:01.424 TVRec(9) Error: Failed to set channel to 5.
> Reverting to kState_None
> 2007-11-02 22:00:01.425 TVRec(9): Changing from RecordingOnly to None
> 2007-11-02 22:00:01.437 Canceled recording (Recorder Failed): 20/20:
> channel 4005 on cardid 9, sourceid 4
>
>
> I swear that card worked last time I tried it, but its been a while
> (and probably a few kernel upgrades and mythtv svn trunk upgrades)
> since I tried it. The part about setting the format to ATSC looks like
> its the problem, since it shouldn't be doing that for an NTSC-only
> card...
>
> /me makes note to self to fix...
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Discuss mailing list
> Discuss at blu.org
> http://lists.blu.org/mailman/listinfo/discuss
>   

-- 
John Abreau
IT Manager
Zuken USA
238 Littleton Rd., Suite 100
Westford, MA 01886
T: 978-392-1777            F: 978-692-4725
M: 978-764-8934
E: John.Abreau at zuken.com  W: www.zuken.com


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



More information about the Discuss mailing list