Re: Linux printing

["Tom Haskins-Vaughan" <user=1517@nabble.blu.org>]

 Dec  4 11:04:52 peru kernel: usb 4-1: USB disconnect, address 3 
Dec  4 11:04:52 peru kernel: usblp0: removed 
Dec  4 11:05:02 peru kernel: usb 4-1: new high speed USB device using 
ehci_hcd and address 4 
Dec  4 11:05:02 peru kernel: usb 4-1: configuration #1 chosen from 1 choice 
Dec  4 11:05:02 peru kernel: usblp0: USB Bidirectional printer dev 4 if 
1 alt 0 proto 2 vid 0x03F0 pid 0x5D11 
Dec  4 11:05:02 peru kernel: scsi4 : SCSI emulation for USB Mass Storage 
devices 
Dec  4 11:05:06 peru hpiod: invalid bulk out endpoint 
hp:/usb/Photosmart_C5200_series?serial=MY76PCC05C04XQ 
io/hpiod/device.cpp 150 
Dec  4 11:05:06 peru hpiod: unable to write data 
hp:/usb/Photosmart_C5200_series?serial=MY76PCC05C04XQ: No such device 
io/hpiod/channel.cpp 63 
Dec  4 11:05:06 peru Photosmart_C5200_series?serial=MY76PCC05C04XQ: 
ERROR: ready to print; will retry in 30 seconds... 
Dec  4 11:05:07 peru kernel: scsi 4:0:0:0: Direct-Access     HP 
                1.00 PQ: 0 ANSI: 5 
Dec  4 11:05:07 peru kernel: sd 4:0:0:0: [sdb] Attached SCSI removable disk 
Dec  4 11:05:07 peru kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0 
Dec  4 11:05:36 peru hpiod: error submitting URB: No such device 
io/hpiod/usbext.c 48 
Dec  4 11:05:36 peru hpiod: unable to write data 
hp:/usb/Photosmart_C5200_series?serial=MY76PCC05C04XQ: No such device 
io/hpiod/channel.cpp 63 
Dec  4 11:05:36 peru Photosmart_C5200_series?serial=MY76PCC05C04XQ: 
ERROR: ready to print; will retry in 30 seconds... 
Dec  4 11:06:06 peru hpiod: error submitting URB: No such device 
io/hpiod/usbext.c 48 
Dec  4 11:06:06 peru hpiod: unable to write data 
hp:/usb/Photosmart_C5200_series?serial=MY76PCC05C04XQ: No such device 
io/hpiod/channel.cpp 63 
Dec  4 11:06:06 peru Photosmart_C5200_series?serial=MY76PCC05C04XQ: 
ERROR: ready to print; will retry in 30 seconds... 

Matthew Gillen wrote: 
> Tom Haskins-Vaughan wrote: 
>> Hi Guys, so with my fourth printer in four days from Staples (it's a 
>> long story - but Staples came off well) I finally got a network printer 
>> working. 
>> 
>> It is an HP5  C5280 connected by USB to my main server running F7. That 
>> is connected via an wireless bridge to the rest of my network. Now, when 
>> I first instelled it using the cups webinterface (localhost:631) it 
>> worked fine. I then used both Mac OS 10.4 and Ubuntu Gutsy to very 
>> easily and successfully add a network printer. 
>> 
>> Now, it's not very robust. I turned it off and on again and now it won't 
>> work. It'll work if I restart my server but that's not really ideal. 
>> Anyone got any suggestions? 
> 
> What does /var/log/messages say when you turn it off and on? 
> 
> Matt 
>