Re: [svlug] 20/20 on Hans Reiser tonight

["John Abreau-2" <user=184@nabble.blu.org>]

 I have that 20/20 episode recorded on a Tivo Series 2, but when 
I tested the video extraction results last night, I found that the 
transcoder didn't sync the audio and video correctly. 

So it's not much use until I find a better transcoder to decode 
the encrypted .tivo files to a properly synced mpeg file. 


Jarod Wilson wrote: 
> On Nov 04, 2007, at 05:23, Kristian Erik Hermansen wrote: 
> 
>> On 11/2/07, Jarod Wilson <[hidden email]> wrote: 
>>> Interesting... Just told Myth to record it. 
>> 
>> So how was the show?  Good?  Where is the recording :-) 
> 
> Ugh. I'm not sure. Need to check my logs and see if I can see 
> anything. I scheduled the recording on my only remaining analog card 
> (lower resolution, faster to transcode, etc) just before sending my 
> prior mail, but at least within the Myth UI I see no evidence of any 
> recording attempt... 
> 
> <a few minutes pass> 
> 
> Okay, the failure was in the backend log. 
> 
> 2007-11-02 22:00:01.390 TVRec(9): Changing from None to RecordingOnly 
> 2007-11-02 22:00:01.417 TVRec(9): HW Tuner: 9->9 
> 2007-11-02 22:00:01.421 Channel(/dev/video0) Error: 
> SetInputAndFormat(6, ATSC) 
>                          while setting format (v4l v2) 
>                         eno: Invalid argument (22) 
> 2007-11-02 22:00:01.422 Channel(/dev/video0) Error: 
> SetInputAndFormat(6, ATSC) 
>                          while setting format (v4l v2) 
>                         eno: Invalid argument (22) 
> 2007-11-02 22:00:01.423 Channel(/dev/video0): SetInputAndFormat() failed 
> 2007-11-02 22:00:01.424 TVRec(9) Error: Failed to set channel to 5. 
> Reverting to kState_None 
> 2007-11-02 22:00:01.425 TVRec(9): Changing from RecordingOnly to None 
> 2007-11-02 22:00:01.437 Canceled recording (Recorder Failed): 20/20: 
> channel 4005 on cardid 9, sourceid 4 
> 
> 
> I swear that card worked last time I tried it, but its been a while 
> (and probably a few kernel upgrades and mythtv svn trunk upgrades) 
> since I tried it. The part about setting the format to ATSC looks like 
> its the problem, since it shouldn't be doing that for an NTSC-only 
> card... 
> 
> /me makes note to self to fix... 
> 
> ------------------------------------------------------------------------ 
> 
> _______________________________________________ 
> Discuss mailing list 
> [hidden email] 
> http://lists.blu.org/mailman/listinfo/discuss
>