cdrecord pblm

[invalid at pizzashack.org (Derek Martin)]

On Mon, Aug 30, 2004 at 06:18:59PM +0000, dan moylan wrote:
> on the same machine, under FC2, trying to use cdrecord, i
> tried the same ploy, but cdrecord does not find the drive.
> 
> dmesg gives:
> ...
> 
> Kernel command line: ro root=LABEL=/ hdd=ide-scsi rhgb quiet
> ide_setup: hdd=ide-scsi

Have you tried it without the hdd= parameter?  FC2 uses the 2.6
Kernel, and that appears to be unnecessary.

When your system boots, or in /var/log/dmesg (or in the output of the
dmesg command), do you see any messages similar to those shown below?

  hdc: DW-224E-A, ATAPI CD/DVD-ROM drive
  hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, UDMA(33)
  Uniform CD-ROM driver Revision: 3.20

I don't have an hdc= parameter in my grub config, but cdrecord still
works fine.  Not sure how -- must be some Kernel magic.  :)

-- 
Derek D. Martin    http://www.pizzashack.org/   GPG Key ID: 0xDFBEAD02
-=-=-=-=-
This message is posted from an invalid address.  Replying to it will result in
undeliverable mail.  Sorry for the inconvenience.  Thank the spammers.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.blu.org/pipermail/discuss/attachments/20040830/670d9e67/attachment.sig>